CXM-TEF Programmable Automatic Temperature Control Furnace
Programmable temperature control (manual/automatic)
System data sheet.
- Key features
- Economical design, five-side heating, dual temperature control, good heat penetration
- Optional specification models
- 4-cup / 18-cup / 24-cup / 32-cup
- 4-cup spec
- Power supply AC220V, power loss 4kW, bore size 280x280x300mm, powder cup setting 3in x 9in (4 cups), size 580x540x780mm
- 18-cup spec
- Power supply three-phase 380V, power loss 8kW/11kW, bore size 410x410x450mm, powder cup setting 4in x 11in (9 single-layer) or 4in x 7in (up to 18 double-layer), size 720x640x1500mm
- 24-cup spec
- Power supply three-phase 380V, power loss 11kW, bore size 560x420x530mm, powder cup setting 4in x 9in (up to 21-24 cups depending on layer arrangement), size 930x815x1625mm
- 32-cup spec
- Power supply three-phase 380V, power loss 14kW, bore size 540x560x560mm, powder cup setting 4in x 11in (16 single-layer) or 3in x 9in (up to 28-32 double-layer), size 930x945x1540mm
- Configuration note
- This model does not use regular chiller/vacuum configuration options, selection is by four machine size/spec variants
What this system is.
CXM-TEF is a programmable constant-temperature electric furnace designed for powder cup preheating and wax-tree related thermal preparation. It supports both automatic and manual temperature programming modes, with stable multi-side heating and improved heat uniformity inside the work chamber. This model is available in multiple tray/cup capacities to match different production scales.
Where it fits.
Typical scenarios this system is built to serve. Your specific line may overlap more than one.
- 18K / 14K Gold
Boutique and mid-volume gold casting where color uniformity and porosity rate are the bottleneck.
- Sterling Silver
Silver jewelry runs where oxidation control and clean pour geometry define the finishing workload downstream.
- Filigree & Fine Detail
Thin-wall pieces where the fill pressure, grain refinement, and surface fidelity have to be dialed in together.
- Rapid Recipe Switching
Lines running multiple alloys or SKU variants in the same day. Stored programs keep handoff-to-cast stable.
Defects this system addresses.
How the architecture of the machine maps onto the failure modes most common in jewelry casting production.
- Porosity & gas inclusions
Vacuum chamber evacuation before pour, with pressure-assisted fill and secondary vibration to collapse micro-voids before the front solidifies.
- Cold-shut & incomplete fill
Positive pressure during fill keeps the front moving through thin walls; recipe-locked thermal profile prevents the temperature drop that causes shorts.
- Color unevenness & segregation
In-chamber melting eliminates the melt-to-cast handoff step where most segregation and oxidation is introduced. One chamber, one thermal envelope.
- Batch-to-batch inconsistency
Stored programs lock the full sequence — temperature ramp, pressure window, vibration timing — so operator judgement isn't re-introduced each run.
- Operator-dependent quality
Digital recipe control removes the places where tacit know-how gets lost on a shift change. The workflow holds, even when the person changes.
Lead time, install, warranty.
- Lead Time
- 4–6 weeks from confirmed order and configuration lock.
- Packaging
- Export-grade wooden crate, rust-prevention wrap, shock-monitor seal on critical SKUs.
- Installation
- On-site commissioning by a Cylanco engineer available in most regions. Remote supervised install for straightforward configurations.
- Training
- Two-day operator + maintenance training — on-site or hybrid — included with flagship systems.
- Warranty
- 12 months on parts and labor. Lifetime technical support for recipe tuning and workflow questions.
- Spares
- Common wear parts kept in stock; airfreight available. Consumables quoted with the initial configuration.
Options & modules.
- Programmable temperature control (manual/automatic)
- Multi-size configuration for different line capacities
- Fast and uniform heating response
- Designed for practical installation and movement
Configure this system for your line.
Share alloy, throughput target, and facility context. We map the right configuration — not a generic machine list — and reply within 24 hours.