CXM-AI Square Melting Furnace
Fast induction melting with stable heating output
System data sheet.
- Power supply
- Three-phase 220V 50/60Hz
- Output power
- 7kW
- Grounding
- Third grounding
- Vibration frequency
- 10-50kHz
- Melted metal
- Gold, silver, copper
- Crucible
- Special configuration crucible (quartz/graphite dual use)
- Cooling mode
- Water cooling
- Trouble alarm
- Self-diagnosis and immediate stop
- Ambient temperature
- 5-40C (humidity below 80%)
- Machine dimension
- 550x550x1100mm
- Optional configuration
- 3P water cooler
- Highlighted customization
- 1-100KG capacity customizable for melting and granulation series
What this system is.
The CXM-AI Square Melting Furnace is designed for precious-metal melting in jewelry workshops and small production lines. It uses high-frequency induction heating for fast melt-up, stable temperature control, and clean operation. The machine is suitable for gold, K-gold, silver, copper, and alloy preparation workflows.
Where it fits.
Typical scenarios this system is built to serve. Your specific line may overlap more than one.
- 18K / 14K Gold
Boutique and mid-volume gold casting where color uniformity and porosity rate are the bottleneck.
- Sterling Silver
Silver jewelry runs where oxidation control and clean pour geometry define the finishing workload downstream.
- Filigree & Fine Detail
Thin-wall pieces where the fill pressure, grain refinement, and surface fidelity have to be dialed in together.
- Rapid Recipe Switching
Lines running multiple alloys or SKU variants in the same day. Stored programs keep handoff-to-cast stable.
Defects this system addresses.
How the architecture of the machine maps onto the failure modes most common in jewelry casting production.
- Porosity & gas inclusions
Vacuum chamber evacuation before pour, with pressure-assisted fill and secondary vibration to collapse micro-voids before the front solidifies.
- Cold-shut & incomplete fill
Positive pressure during fill keeps the front moving through thin walls; recipe-locked thermal profile prevents the temperature drop that causes shorts.
- Color unevenness & segregation
In-chamber melting eliminates the melt-to-cast handoff step where most segregation and oxidation is introduced. One chamber, one thermal envelope.
- Batch-to-batch inconsistency
Stored programs lock the full sequence — temperature ramp, pressure window, vibration timing — so operator judgement isn't re-introduced each run.
- Operator-dependent quality
Digital recipe control removes the places where tacit know-how gets lost on a shift change. The workflow holds, even when the person changes.
Lead time, install, warranty.
- Lead Time
- 4–6 weeks from confirmed order and configuration lock.
- Packaging
- Export-grade wooden crate, rust-prevention wrap, shock-monitor seal on critical SKUs.
- Installation
- On-site commissioning by a Cylanco engineer available in most regions. Remote supervised install for straightforward configurations.
- Training
- Two-day operator + maintenance training — on-site or hybrid — included with flagship systems.
- Warranty
- 12 months on parts and labor. Lifetime technical support for recipe tuning and workflow questions.
- Spares
- Common wear parts kept in stock; airfreight available. Consumables quoted with the initial configuration.
Options & modules.
- Fast induction melting with stable heating output
- Compact square-body design for workshop deployment
- Easy operation with clear control panel
- Suitable for continuous daily melting tasks
- Optional water chiller support for stable long-run operation
Configure this system for your line.
Share alloy, throughput target, and facility context. We map the right configuration — not a generic machine list — and reply within 24 hours.